ISW horizontal end suction pump single stage pipeline monoblock
motor pump
Introduction:
1. ISW horizontal end suction pump single stage pipeline monoblock
motor pump is a high-effective energy-saving product designed by
Ronda.
2. Stable running, low noise, high concentricity of components.
Bearings of low noise are used for the motor, the impellers are of
best dynamic and static balance, no vibration at running and the
environment thus being improved.
3. No leakage. The shaft is mechanically sealed with carbide alloy
wearable material, settling the serious leakage of the filling seal
of a centrifugal pump, extending the duration and ensuring the
operation place clean and tidy.
4. Widely used in industrial and cities’ water supply and drainage,
high buildings’ booster water supply, gardens irrigation,
fire-fighting booster, remote water supply, warming systems,
circular booster of cold&hot water in bath rooms as well as in
competitions of equipments.
5. The pump, according to the operation condition of the worksite,
may be vertically, horizontally etc. and also according to the
requirements for the flow and stroke, mounted in parallel and/or in
series to increase the needed flow and stroke.
6. The flow range is 1.1-2400m3/h and the stroke range 8-160m and there are basic type, by-pass
type, A B C cutting type etc. And per the different flow medium and
temperature, IRG/IRGB/ISWR hot water pump, IHG/IHGB/ISWH chemical
pump and YG/YGB/ISWB oil pump etc. Series products. of the same
type and same property data have been designed and made.
Product details:
| Working Principle: | Centrifugal |
| Main applications: | Water (oil, chemical, contact us) |
| Driver: | Electric motor |
| Power Specs: | 220V/240V380/415V 3phase; 50hz/60hz |
| Max.permissible fluid temperature: | 100℃ (212°F) |
| Type of connection: | Flange |
| Casing: | Cast iron, Stainless steel |
| Impeller: | Cast iron, Stainless steel, Bronze |
| Shaft seal type: | Mechanical seal |
| Maximum drive rating: | 250KW(340HP) |
| Maximum caliber: | 500mm(20inch) |
| Maximum discharge-side pressure: | 1.6MPa(16bar) |
| Maximum head: | 160m(524.8ft) |
| Flow rate range: | 1.1-2400m3/h(4.8-10560US.GPM) |
| Pump type: | Water, Hot water type, oil type, chemical type |
Performance data:
| Model | Capacity | Head | Power | Speed | Eff. | (NPSH)r | Weight |
| (m3/h) | (L/s) | (m) | (KW) | (r/min) | (%) | (m) | (kg) |
| 15-80 | 1.1 | 0.3 | 8.5 | 0.18 | 2800 | 32.1 | 2.3 | 20 |
| 1.5 | 0.42 | 8 |
| 2 | 0.56 | 7 |
| 20-110 | 1.8 | 0.5 | 16 | 0.37 | 2800 | 32.4 | 2.3 | 25 |
| 2.5 | 0.69 | 15 |
| 3.3 | 0.91 | 13.5 |
| 20-125 | 1.8 | 0.5 | 21 | 0.75 | 2800 | 28.1 | 2.3 | 35 |
| 2.5 | 0.69 | 20 |
| 3.3 | 0.91 | 18.6 |
| 20-160 | 1.8 | 0.5 | 33 | 1.5 | 2950 | 18.8 | 2.3 | 38 |
| 2.5 | 0.69 | 32 |
| 3.3 | 0.91 | 30 |
| 25-110 | 2.8 | 0.78 | 16 | 0.55 | 2950 | 41.2 | 2.3 | 31 |
| 4 | 1.11 | 15 |
| 5.2 | 1.44 | 13.5 |
| 25-125 | 2.8 | 0.78 | 20.5 | 0.75 | 2950 | 37.5 | 2.3 | 35 |
| 4 | 1.11 | 20 |
| 5.2 | 1.44 | 18 |
| 25-125A | 2.5 | 0.39 | 17 | 0.75 | 2950 | 36.6 | 2.3 | 35 |
| 3.6 | 1 | 16 |
| 4.6 | 1.28 | 14.5 |
| 25-160 | 2.8 | 0.78 | 33 | 1.5 | 2950 | 29.9 | 2.3 | 44 |
| 4 | 1.11 | 32 |
| 5.2 | 1.44 | 30 |
| 25-160A | 2.6 | 0.72 | 29 | 1.1 | 2950 | 29 | 2.3 | 40 |
| 3.7 | 1.03 | 28 |
| 4.9 | 1.36 | 26 |
| 32-100 | 3.5 | 0.97 | 14.5 | 0.55 | 2950 | 45.9 | 2.3 | 35 |
| 4.5 | 1.24 | 12.5 |
| 5.3 | 1.47 | 11 |
| 32-125 | 3.5 | 0.97 | 22 | 1.1 | 2950 | 42.2 | 2.3 | 38 |
| 5 | 1.39 | 20 |
| 6.5 | 1.8 | 18 |
| 32-125A | 3.1 | 0.86 | 20 | 0.75 | 2950 | 41.2 | 2.3 | 37 |
| 4.5 | 1.25 | 16 |
| 5.8 | 1.61 | 10 |
| 32-160 | 3.5 | 0.97 | 34 | 1.5 | 2950 | 32.8 | 2.3 | 49 |
| 4.5 | 1.25 | 32 |
| 6 | 1.67 | 26 |
| 32-160A | 3.5 | 0.97 | 26.5 | 1.1 | 2950 | 31.8 | 2.3 | 43 |
| 4.5 | 1.25 | 25 |
| 6 | 1.67 | 19 |
| 32-200 | 3.5 | 0.97 | 53 | 3 | 2950 | 23.8 | 2.3 | 68 |
| 4.5 | 1.25 | 50 |
| 5.5 | 1.53 | 45 |
| 32-200A | 3 | 1.08 | 43 | 2.2 | 2950 | 22.9 | 2.3 | 58 |
| 4 | 1.11 | 40 |
| 5 | 1.17 | 37 |
| … … |
| 400-300 | 820 | 228 | 23 | 90 | 1480 | 78.2 | 6 | 1450 |
| 1080 | 300 | 20 |
| 1300 | 361 | 16 |
| 400-315 | 820 | 228 | 36.5 | 132 | 1480 | 81.1 | 6 | 1740 |
| 1080 | 300 | 32 |
| 1300 | 361 | 27 |
| 400-450 | 1500 | 416.7 | 23 | 160 | 980 | 80.6 | 6.5 | 2420 |
| 2000 | 555.6 | 20 |
| 2400 | 666.7 | 15 |
| 400-450A | 1400 | 388.9 | 20 | 132 | 980 | 79.3 | 6.5 | 1940 |
| 1860 | 516.7 | 17 |
| 2250 | 625 | 14 |
| 400-500 | 1500 | 416.7 | 34 | 250 | 980 | 82.8 | 6.5 | 2980 |
| 2000 | 555.6 | 32 |
| 2400 | 666.7 | 27 |
| 400-500A | 1400 | 388.9 | 30 | 200 | 980 | 81.9 | 6.5 | 2840 |
| 1860 | 516.7 | 28 |
| 2240 | 625 | 24 |
| 400-500B | 1300 | 361.1 | 26 | 160 | 980 | 80.9 | 6.5 | 2710 |
| 1750 | 486.4 | 24 |
| 2100 | 583.3 | 21 |
| 500-300 | 1000 | 277.8 | 23 | 110 | 1480 | 81.7 | 6 | 1800 |
| 1200 | 333 | 20 |
| 1450 | 403 | 16 |
| 500-315 | 1000 | 277.8 | 34.5 | 160 | 1480 | 80.9 | 6 | 2070 |
| 1200 | 333 | 32 |
| 1450 | 403 | 27 |
Parameter table above is only a part of whole. For more, please
contact us directly.
